Our Team Our Mission Our Vision Our Strengths Company Policy Our Solution

Amplifiers

Key Features
• Super-efficient power with outstanding performance
• Innovative Class-H design
• 1800 W per channel (2 Ω)
• Dynamic headroom for all real-world applications
• XLR pass-though input connections
• Easy connection to bi-amped loudspeakers
• Switchable LPN filter for extra tonal fundamentals and "kick"
• Protective low-cut for systems without subwoofers
• Built-in dynamic limiters
• Complete protection package
• Three-stage front-to-rear fans

Overview

  • Super-efficient power with outstanding performance
  • Innovative Class-H design
  • 1800 W per channel (2 Ω)
  • Dynamic headroom for all real-world applications
  • XLR pass-though input connections
  • Easy connection to bi-amped loudspeakers
  • Switchable LPN filter for extra tonal fundamentals and "kick"
  • Protective low-cut for systems without subwoofers
  • Built-in dynamic limiters
  • Complete protection package
  • Three-stage front-to-rear fans

Specifications -

Key Features
• Cool-running, saturation-free power for distributed installations
• Ideal for sound reinforcement, paging, and life safety
• 250 W mono for 70/100 V lines
• Compact 2 RU design
• Stepped rear-panel level attenuation
• Selectable 50 Hz or 300 Hz high-pass filter
• Thermal protection, peak limiting, turn-on delay
• Phoenix-type inputs and outputs
• Three-stage front-to-rear fans
• Integrated rack ears for direct mounting

Overview

  • Cool-running, saturation-free power for distributed installations
  • Ideal for sound reinforcement, paging, and life safety
  • 250 W mono for 70/100 V lines
  • Compact 2 RU design
  • Stepped rear-panel level attenuation
  • Selectable 50 Hz or 300 Hz high-pass filter
  • Thermal protection, peak limiting, turn-on delay
  • Phoenix-type inputs and outputs
  • Three-stage front-to-rear fans
  • Integrated rack ears for direct mounting

Specifications -

Key Features
• The PA series are a range high-power amplifiers built to have outstanding sound quality
• excellent power efficiency, a compact yet rugged body and guaranteed operational reliability
• At the same time the PA series amplifiers have an exceptional economical viability!
• The PA series is now hybrid; which means it can run stable even on lower supply voltages

Overview

  • Switchable Low-cut switch for protection & tight-low end performance
  • 3 switchable operational modes: Stereo, Mono & Bridge
  • Switchable Limiter Switch to protects speakers from damage due to distorted input signals
  • Intelligent cooling using low-noise variable speed fans & direct mounted over-designed heat-sinks
  • High quality glass epoxy, double-sided PTH PCB’s and high-grade components ensures reliability in even tough ambient environs
  • Magnetic power switch for phase aligned switching, over current and thermal overload protection
  • 32-detent rotary volume knobs
  • Mute, Signal, Clip and fault LED indicators assists you to monitor performance
  • Input: Balanced XLR and 1/4” Stereo Jack
  • Output: Neutrik™ Speakon for easy yet ’trip-proof’ connections
  • Sensitivity (0dB or+4 dB) selection switch allows flexibility in connection of input sources
  • Quick clean filters for fans
  • High-current toroidal transformers with high-grade cores for greater transient response & low-noise even at 2 Ohms
  • Independent DC, RFI, short circuit and thermal overload protection for amplifier and speakers protection

Specifications - P - Series

Specifications
 
Model PA 1.5 PA 2.0 PA 3.0 PA 4.5 PA 6.0
Power Output
2 ohms (True RMS), 20Hz-20kHz, 1% THD
2 ohms (EIA), 1kHz , 1%THD
2 x 800 W
2 x 1225 W
2 x 1000 W
2 x 2250 W
2 x 1500 W
2 x 2750 W
2 x 2250 W
2 x 3900 W
2 x 3000 W
2 x 5625 W
4 ohms (True RMS), 20Hz-20kHz, 1% THD
4 ohms (EIA), 1kHz , 1%THD
2 x 650 W
2 x 1012W
2 x 800 W
2 x 1380 W
2 x 1100 W
2 x 1580 W
2 x 1600 W
2 x 2450 W
2 x 2000 W
2 x 3100 W
8 ohms(True RMS), 20Hz-20kHz, 1% THD
8 ohms(EIA), 1kHz , 1%THD
2 x 350 W
2 x 595W
2 x 500 W
2 x 755 W
2 x 700 W
2 x 830 W
2 x 950 W
2 x 1225 W
2 x 1300 W
2 x 1700 W
Bridged Mode
4 ohms(True RMS), 20Hz-20kHz, 1% THD
4 ohms(EIA), 1kHz , 1%THD
1600 W
2500 W
2000 W
4500 W
3000 W
5500 W
4500 W
7800 W
6000 W
11250 W
8 ohms(True RMS), 20Hz-20kHz, 1% THD
8 ohms(EIA), 1kHz , 1%THD
1300 W
2025 W
1600 W
2760 W
2200 W
3160 W
3200 W
4550 W
4000 W
6200 W
Damping factor > 200 :1 (8 Ω) > 200 :1 (8 Ω) > 400 :1 (8 Ω) > 400 :1 (8 Ω) > 400 :1 (8 Ω)
Frequency Response 20Hz - 20kHz (-3dB)
Protection Devices Temperature, DC, RFI Short Circuit, Soft-Start, Thermal Power Transformer
Input Connector (Per CH.) XLR, 1/4” TRS Jack
Output Connector (Per CH.) Speakon Connector
Dimensions (WxDxH)mm 482 x 455 x 88 482 x 455 x 88 482 x 455 x 132 482 x 520 x 132 482 x 520 x 132
  (2U) (2U) (3U) (3U) (3U)
Net Weight (Kgs.) 17 18 28 32 36
Key Features
• Studiomaster Professional DPA Series power amplifier represents state-of-the-art professional quality & performance at an affordable price. Perfectly suited for a wide range of sound reinforcement applications including Professional touring, performing musicians, and mobile entertainers. The DPA Series is optimized to deliver high levels of sustained power, extraordinary audio performance and road-proven reliability.

Overview

  • Balanced / unbalanced inputs signal through parallel XLR connector in both channels
  • Output termination on 4 way speakon connectors and binding posts for each channel
  • Selectable slide switch for stereo, parallel & bridge mono amp modes
  • Selectable sensitivity slide switch for ( 0.775V , 1V or 1.4V)
  • Selectable slide switch for low-cut (30Hz) on/off
  • Selectable slide switch for ground lift in case of ground loops
  • Selectable Slide Switch for HF Limiter
  • Signal and Clip LED indicators to monitor performance
  • Front mounted detent gain controls for easy access
  • Fast recovery design for lower distortion if clipping occurs
  • Low THD and high damping factor for excellent sound quality
  • Advanced protection circuitry guards against: short circuit, open circuit, thermal, and DC
  • Two variable speed fans
  • 19” rack mountable Rugged housing

Specifications - DPA - Series

Specifications

MODEL DPA 2000 DPA 3200 DPA 4500 DPA 5000
2 ohms(True RMS), 20Hz-20kHz, 1% THD
2 ohms(EIA), 1kHz , 1%THD
2 x 1040 W
2 x 2250 W
2 x 1600 W
2 x 3900 W
2 x 2200 W
2 x 4550 W
2 x 2600 W
2 x 4900 W
4 ohms(True RMS), 20Hz-20kHz, 1% THD
4 ohms (EIA), 1kHz , 1%THD
2 x 780 W
2 x 1380W
2 x 1200 W
2 x 2450 W
2 x 1650 W
2 x 3000 W
2 x 1950 W
2 x 3200 W
8 ohms(True RMS), 20Hz-20kHz, 1% THD
8 ohms(EIA), 1kHz , 1%THD
2 x 520 W
2 x 755W
2 x 800 W
2 x 1225 W
2 x 1100 W
2 x 1700 W
2 x 1300 W
2 x 1800 W
Bridged Mode
4 ohms(True RMS), 20Hz-20kHz, 1% THD
4 ohms (EIA), 1kHz , 1%THD
2080 W
4500 W
3200 W
7800 W
4400 W
9100 W
5000 W
9800 W
8 ohms(True RMS), 20Hz-20kHz, 1% THD
8 ohms(EIA), 1kHz , 1%THD
1560 W
2760 W
2400 W
4550 W
3300 W
6000 W
3900 W
6400 W
Damping Factor > 200 :1 (8 Ω) >300 : 1 (8 Ω) >300 : 1 (8 Ω) >300 : 1 (8 Ω)
Frequency Response 20Hz - 20kHz (+/-0.5dB)
Protection Device DC, Short Circuit,
Over heat ,over load		 DC, Short Circuit, Over heat protection, Soft start,
Clip Limit, Over load
Input Connector (Per Channel) XLR
Output Connector (Per Channel) Speakon and Binding post
Dimensions (WxDxH )mm 483 x 455 x 88
(2U) 		483 x 455 x132
(3U) 		483 x 455 x132
(3U)		 483 x 455 x132
(3U)
Net Weight (kgs) 27.6 40.3 44 47
Key Features
• High quality design, robust construction, Short Circuit protection with protect LED indicator. A Range of high output, high quality stereo power amplifiers offering greater reliability. Built for a variety of applications like Disco, stage and PA amplifications. Light weighted, easy to transport amplifier series.

Overview

  • Rugged & Reliable Stereo Power Amplifier.
  • EQ Processing, Low Cut, Subwoofer selection options on rear panel.
  • Stereo, Bridge & Parallel mode selection switch.
  • Protection: Temperature DC Short Circuit.
  • Input: Balanced XLR & 1/4” Jack.
  • Output: Speakon & Binding Post Connectors.
  • Mains voltage operation 220VAC-240VAC as well as low voltage operation (150VAC).
  • Large cooling Fan.
  • 19” rack mountable.

Specifications -

Key Features
• A Range of high output, high quality stereo power amplifiers offering greater reliability, built for a variety of applications like Disco, stage & PA amplifications.

Overview

  • 2 channel amplifier with individual level control
  • LED Indicator for Power on, Clip-L, Clip-R and protection
  • Light weighted amplifiers most suited for installation & also for powering the HF’s in a 3 way set up

Specifications - DJA 1000

Specifications
 
Model DJA 1000
Power Output(RMS) 4 ohms
  8 ohms
2 X 500 W
2 X 300 W
Single Channel Driven 4 ohms
  8 ohms
540 W
340 W
Frequency Response 20Hz-20KHz (±3dB)
Damping Factor > 100: 1( 8 Ω )
Protection Device Short circuit & Over heating
Input Connector (Per Channel) RCA Phono & XLR/ jack combo
Output Connector (Per Channel) Speakon
Dimensions (W X D X H) mm 482 x 330 x 88 (2U)
Net Weight (Kgs.) 14